PVC steel reinforced hose pipe production line:
This PVC steel wire reinforced pipe hose production line manufacture the pipe hose which owns such features as transparent and no poison, has steel wire inserted in the PVC body. It fits to the temperature range from 10 degree below zero to 65 degree above zero. The hose is transparent and has good cold or hot resistance. PVC steel reinforced hose pipe production line may be small winding radius. And has great ability of minus pressure resistanee. It can be widely used in sanitary foodstuff. To be used for drawing and conveying water, oil and powder in factory, agriculture, building.

We can offer the PVC steel reinforced hose pipe production line which can manufacture the PVC steel reinforce pipe from 12mm-152mm.

PVC steel reinforced hose pipe production line:
1. Single screw extruder: SJ-65/28: 1set
   Center height: 1000mm
   Rotate speed: 0-70r/min
1.1 Gear box: hard surface grinding, low noise.
1.2 Screw and barrel
Screw diameter: 65mm
L/D: 28/1
Screw material: 38CrMoAlA
Screw structure: BM double screw thread separated type
Heat processing mode: nitriding
Surface hardness: HV940-1050, hard chrome plated
Nitriding depth: 0.6-0.7mm
1.3 Barrel heat and cooling parameter
   Barrel heating: cast-aluminum heater, 3 sections, 6.6KW
   Cooling mode: subsection air cooling
1.4 Main motor parameter
   Motor model: Fuji frequency conversion
   Motor power: 15KW
1.5 Electric controlling:
   Temperature controlling meter: RKC temperature controlling meter
   Low voltage electric: SIEMENS
2. Cooling water tank: 1 set
Length: 2000mm
Cooling mode: spray, water channel
stainless steel
 
3. Haul-off: 1 set
  Haul-off speed: 0-18m/min
  Pedrail: nylon anti-slip belt
Effective length: 600mm

4. Braider: 1 set
  Steel track base
  Forward-backward movement, up-down micro adjusted.
5. Mould: 13, 16, 19, 25, 32mm
6. Printer: silicon-rubber shift printer: 1 set
7. Winder: 1 set
8. Steel winder: 1.5KW, 1 set